17766358885
3.2 certificate
3.2 certificate

EN 10204-3.2 the issuing agency of the certificate must be an EU authorized agency. The en 10204-3.2 certificate is a valid certificate to prove to the customer that the product conforms to the European material specification. Generally, for the exported large-scale equipment, pressure equipment and other products, the raw material supplier needs to provide the en 10204 certificate to prove that the raw materials used on the equipment conform to the European specification. The en 10204 certificate is applicable to any metal material, such as steel, weldment and other products. The detailed content of the certificate is not clearly required in the en 10204 standard, which is generally based on the product standard. For example, according to the furnace batch number, the material, tensile strength, hardness, NDT detection content, etc.            3.2 the type 2 inspection documents shall be prepared by the inspection representative designated by the manufacturer (not related to the manufacturing department) and the inspection representative designated by the purchaser or the inspection personnel designated by the official regulations. The documents shall indicate that the supplied products meet the requirements of the order and provide the test data. This type of inspection document allows the manufacturer to transcribe the relevant test results obtained from the special inspection of its original products and purchased products to the type 3.2 inspection document, as long as the manufacturer adopts the traceability procedure and can provide the required corresponding inspection documents. 3.2 the issuance of type 2 inspection documents requires the intervention of authorized agencies.